Samsung galaxy note 2014 10.1 inch glass replacement!

Is this post we layout the process for the samsung galaxy note 10.1 2014 glass replacement only! 

The first step is to make sure the glass is the only piece that's broken so make sure to turn it on and you're able to see the full picture. If you're not able to see anything or only part of the screen then you will have to replace the LCD as well.

In this case the tablet turns on and we are able to see everything fine.

Step 1

Carefully remove the back cover use a pry tool to go around the entire tablet until all the clips are released.

Step 2

Remove the frame

Step 3

At this point you can begin removing the glass. It is a very delicate procedure and if you don't have enough experience working with galaxy phones you should not try this.

The glass and the LCD are glued together with loca glue so you will have to heat up the entire screen and carefully pry them apart. This is what it looks like after you successfully remove the screen.

Step 4

Remove the glue residue that's left behind, you can use goo gone and alcohol. Once the LCD is nice and clean you're now ready to install the new glass!

This process is very difficult and should not be performed by anyone that's doing a repair of this kind for the first time.

Always search for a professional in your area to perform this repair.

Here at NJ Phone Fix we're privileged to put this information out into the internet for the world to see, always try and save your devices by repairing them it's good for the environment, it supports your local repair shops and it's good for your wallet!

Until next time 

jfgafjgakgjajdsgjaghjkfd